171 -1200 lbs Magnetic Locking device
171- Single magnetic locking device - outswinging door.

Features

171 MAGNETIC LOCKING DEVICE

Asterisk's Electromagnetic locking devices will secure a door with holding force of up to 1200 lbs. They offer continous monitoring capability for open/closed status or attemped unauthorised entry.The fail-safe magnets will securely lock fire exit doors, yet will depower when signaled to do so by an appropriate door control unit.

Features:

• Low projection from header. This will accommodate most door conditions without the need for filler plates or spread brackets.
• low energy consumptions.
• 1200 lbs holding force - 0.25 amp @24vdc , 0.5 amp @ 12vdc
• Door position switch- standard feature
• Built-in spike or surge suppresions.
• Easy installation and maintanance
• Custom length housing available
• No pins, latches or moving parts
• Standard finishes - Satin anodized aluminum
• Other finishes available, consult factory

DIMENSION: MAGNET - 7-3/8 X 1-3/4" X 2", ARMATURE- 4-1/8" X 1-3/4" X 5/8"

ELECTRICAL DATE: 6 WATTS - 0.25 AMP @ 24VDC, 6 WATTS - 0.5 AMP @ 12VDC

DOOR POSITION SWITCH - FORM"C" CONTACT

Options

• MAGNETIC BOND SENSOR (MBS)
• RED LED
• GREEN LED
• RED/GREEN LED
• BUILT-IN DOOR ACTUATOR ( BDA)
• POWER SENSOR SWITCH (PSS)
• COVER TAMPER SWITCH

SPECIFICATIONS:

All electromagnetic locks shall be Asterisk Security 170 Series magnetic locking devices. The magnetic locking devices shall not incorporate latch pin, or similar moving parts to keep the door in a closed position. It shall be UL or ULC listed. The magnet must provide maximum site flexibility by being of narrow profile of not greater than 2" high and 1-3/4" deep, allowing for maximum head clearance or door openning width when used in a vertical position. the magnet must be non-handed with integral wire connection spacing at each end of the magnet. The magnet face must be field serviceable for refinishing as necessary to retain maximum holding force.Suppresion of harmful transient/spiking and resistance to residue magnetism as required to meet UL or ULC listing shall be built in and not external to the magnet. The armature shall be 5/8" cold rolled steel, cadmium plated.